BROTHER BEAR (PENANG)
4C, Jalan Masjid Negeri, Jelutong,
11600, George Town, Penang
📞 011-16734340
Mon-Sun 10am-7.30pm
BROTHER BEAR (KEDAH)
839&840, Taman Kempas Indah 3, 09000 Kulim, Kedah.
📞WA 011-20034340
Mon-Sun 10am-7.30pm
Shapee Wearable Breastpump Spare Parts
[1] Valve: 2-4 months
Replacement Valve for Shapee Wearable Breastpump
Advisable to change every 2 - 4 months.
Packaging: 1 pcs
[2] Silicone Funnel Insert (24mm)
Suitable for Youha Ava/Shapee Milk Lab.
This funnel insert is to cater for nipple size between 13mm until 17mm.
Made from silicone.
Packaging: 1 pcs
[3] Flange Insert: 2-4 months (17mm/19mm/21mm)
FEATURES:
Made from BPA free silicone
Non-toxic and harmless, no peculiar smell, safe to use
Environmental friendly, washable and reusable
Reduce the breast shield nipple tunnel size down
Great solution for small-nippled mothers
Can be used on most handsfree bras
1 pieces (loose pack)
AVAILABLE SIZE:
17mm FlangeInsert:
-Suitable for nipple diameter (after a pumping session) 12-14 mm
-1 x 17 mm insert to be installed onto 24/25mm cup to reduce to 17mm
19mm Flange Insert:
-Suitable for nipple diameter (after a pumping session) 14-16 mm
-1 x 19 mm insert to be installed onto 24/25mm cup to reduce to 19mm
21mm Flange Insert:
-Suitable for nipple diameter (after a pumping session) 16-18 mm
-1 x 21mm inserts to reduce 24/25mm cups down to 21 mm
**You must "fold" the flange insert to install, and "twist and turn" to remove the insert. If you don't do so, it is hard to install and remove.
[4] Breast Pump 2.0 Silicone Funnel 28mm
FAQ:
Q: Can it be sterilize?
A: Yes, you may sterilize each parts except the Breast pump motor. To prolong the expected lifespan, you may need to disassemble the product each time you sterilize. Make sure to wipe it clean to store.
Q: Is it compatible with breastpump 1.0 version?
A:No, as each of compartments is different.
[5] Breast Pump 1.0 Tightening Rubber (2 Pieces)
Lifespan for each accessory & parts:
✅ Valve: 2-4 months
✅ Flange Insert: 2-4 months
✅ Backflow protector: 3-6 months
✅ Valve base, Silicone shield & Collector cup casing: 6 months
Shapee Wearable Breastpump Spare Parts
[1] Valve: 2-4 months
Replacement Valve for Shapee Wearable Breastpump
Advisable to change every 2 - 4 months.
Packaging: 1 pcs
[2] Silicone Funnel Insert (24mm)
Suitable for Youha Ava/Shapee Milk Lab.
This funnel insert is to cater for nipple size between 13mm until 17mm.
Made from silicone.
Packaging: 1 pcs
[3] Flange Insert: 2-4 months (17mm/19mm/21mm)
FEATURES:
Made from BPA free silicone
Non-toxic and harmless, no peculiar smell, safe to use
Environmental friendly, washable and reusable
Reduce the breast shield nipple tunnel size down
Great solution for small-nippled mothers
Can be used on most handsfree bras
1 pieces (loose pack)
AVAILABLE SIZE:
17mm FlangeInsert:
-Suitable for nipple diameter (after a pumping session) 12-14 mm
-1 x 17 mm insert to be installed onto 24/25mm cup to reduce to 17mm
19mm Flange Insert:
-Suitable for nipple diameter (after a pumping session) 14-16 mm
-1 x 19 mm insert to be installed onto 24/25mm cup to reduce to 19mm
21mm Flange Insert:
-Suitable for nipple diameter (after a pumping session) 16-18 mm
-1 x 21mm inserts to reduce 24/25mm cups down to 21 mm
**You must "fold" the flange insert to install, and "twist and turn" to remove the insert. If you don't do so, it is hard to install and remove.
[4] Breast Pump 2.0 Silicone Funnel 28mm
FAQ:
Q: Can it be sterilize?
A: Yes, you may sterilize each parts except the Breast pump motor. To prolong the expected lifespan, you may need to disassemble the product each time you sterilize. Make sure to wipe it clean to store.
Q: Is it compatible with breastpump 1.0 version?
A:No, as each of compartments is different.
[5] Breast Pump 1.0 Tightening Rubber (2 Pieces)
Lifespan for each accessory & parts:
✅ Valve: 2-4 months
✅ Flange Insert: 2-4 months
✅ Backflow protector: 3-6 months
✅ Valve base, Silicone shield & Collector cup casing: 6 months
