BROTHER BEAR (PENANG)
4C, Jalan Masjid Negeri, Jelutong,
11600, George Town, Penang
📞 011-16734340
Mon-Sun 10am-7.30pm
BROTHER BEAR (KEDAH)
839&840, Taman Kempas Indah 3, 09000 Kulim, Kedah.
📞WA 011-20034340
Mon-Sun 10am-7.30pm
Maxi Cosi Kore Pro I-size R129
- Weight range: There is no weight minimum or maximum
- Height range: A child height of 100-150 cm
- Lowest belt guide position: 32 cm
- Highest belt guide position: 51 cm
- Maxi-Cosi recommends a maximum of 10 years of use
- Replace after any crash — Maxi-Cosi offers a Car Seat Swap Service in some European countries. After a crash they may offer to replace your seat free of charge.
Measurements
- Width at widest point on base (front of the seat pan): 45 cm
- Width at narrowest point on base (at the back): 31 cm
- Width at widest point of seat: 45 cm (front of seat pan) with headrest at lowest setting; 49.5 cm (at shoulders) with headrest fully extended
- Shoulder area measurement: 26-29 cm at the back depending on backrest height; 31-37 cm at the front depending on backrest height
- Seating area width (at the back): 22.5 cm
- Seat pan depth: 34 cm
- Weight of booster: 6.1 kg
Features
- ClickAssist light
- Expands in width as well as height
- i-Size compliant
The cover of the Kore Pro i-Size features bamboo fibres intended to help with temperature regulation. In addition, mesh fabric panels at the sides of the seat are also intended to help keep young passengers cooler. Several rather refined colour choices are available.
The cover is removable and can be washed at 30 on a gentle cycle followed by drip drying.
The back of the Kore Pro i-Size adjusts upward to ensure the shoulder belt guide is in the correct position. The manual shows that the correct position for the back is with the bottom of the headrest aligned with the child’s jawline.
I found that adjusting the headrest took a bit of practice, but once I got the hang of it I found it easier to do with the seat installed than some other boosters I’ve tried. Squeeze the adjustment handle on one side of the headrest — to get the leverage to do this, put your fingers into the belt guide, then use your thumb to squeeze the handle. Then pull up (the booster raises from the bottom of the backrest rather than the top) to the desired height, release the handle, and make sure the back is locked into position.
Installation: With ISOFIX
The ISOFIX arms on the Kore Pro i-Size operate independently of each other. This is a bit different from some other seats, but is pretty easy to get used to.
Maxi Cosi Kore Pro I-size R129
- Weight range: There is no weight minimum or maximum
- Height range: A child height of 100-150 cm
- Lowest belt guide position: 32 cm
- Highest belt guide position: 51 cm
- Maxi-Cosi recommends a maximum of 10 years of use
- Replace after any crash — Maxi-Cosi offers a Car Seat Swap Service in some European countries. After a crash they may offer to replace your seat free of charge.
Measurements
- Width at widest point on base (front of the seat pan): 45 cm
- Width at narrowest point on base (at the back): 31 cm
- Width at widest point of seat: 45 cm (front of seat pan) with headrest at lowest setting; 49.5 cm (at shoulders) with headrest fully extended
- Shoulder area measurement: 26-29 cm at the back depending on backrest height; 31-37 cm at the front depending on backrest height
- Seating area width (at the back): 22.5 cm
- Seat pan depth: 34 cm
- Weight of booster: 6.1 kg
Features
- ClickAssist light
- Expands in width as well as height
- i-Size compliant
The cover of the Kore Pro i-Size features bamboo fibres intended to help with temperature regulation. In addition, mesh fabric panels at the sides of the seat are also intended to help keep young passengers cooler. Several rather refined colour choices are available.
The cover is removable and can be washed at 30 on a gentle cycle followed by drip drying.
The back of the Kore Pro i-Size adjusts upward to ensure the shoulder belt guide is in the correct position. The manual shows that the correct position for the back is with the bottom of the headrest aligned with the child’s jawline.
I found that adjusting the headrest took a bit of practice, but once I got the hang of it I found it easier to do with the seat installed than some other boosters I’ve tried. Squeeze the adjustment handle on one side of the headrest — to get the leverage to do this, put your fingers into the belt guide, then use your thumb to squeeze the handle. Then pull up (the booster raises from the bottom of the backrest rather than the top) to the desired height, release the handle, and make sure the back is locked into position.
Installation: With ISOFIX
The ISOFIX arms on the Kore Pro i-Size operate independently of each other. This is a bit different from some other seats, but is pretty easy to get used to.
